Here follows a list of all warning codes on the app. Click the link on the code to further see how errors can be resolved.
101: Unable to connect to the communicator. This could be due to GSM networks not being available or congested.
102: An invalid response has been received from the communicator.
103: A link could not be established with the panel. Check that your communicator panel settings match the alarm panel.
104: A link could not be established with the panel.
105
106: The wireless device selected does not match the command. Please check your wireless type settings.
107: The wireless device does not support this command. Please check your wireless type settings.
108
120: There is already an active connection to the panel. This could be another user or a communicator upgrade.
121
122
123: Unable to connect to the user servers.
124
125
126: This user does not have permission to access the panel.
127: The connection to the user server has been lost.
128: Unable to connect to the communicator. This could be due to the cellular network not being available or congested.
129: The cellular network provider dropped communication to the panel.
140
141
142: The server connection has been dropped due to inactivity.
143: The device connection has been dropped due to inactivity.
144: The connection to the panel was lost.
145: The panel did not respond in time.
146: The command is not supported. Please check your panel setting on the communicator.
147
148
149
160: The user code to connect to the alarm panel. Please use the same user code used to arm/disarm the alarm panel.
161
162
163: The user code to connect to the alarm panel. Please use the same user code used to arm/disarm the alarm panel or change your panel settings.
164
165: An unknown panel error was received from the alarm panel.
166: The alarm panel version is outdated and does not support this command.
167
168
169: The alarm panel denied this command. The user might not have permission from the alarm panel to perform this action.
170
171: Too many commands have been sent to the alarm panel.
172: Too many commands have been sent to the alarm panel.
173: Too many commands have been sent to the alarm panel.
174: Too many commands have been sent to the alarm panel.
175: The alarm panel interface module did not respond.
176: The alarm panel interface module did not respond.
177: The alarm panel interface module did not respond.
178: The alarm panel interface module is not communicating with the alarm panel.
179: The alarm panel interface module is busy at present.
180: The alarm panel interface module is busy at present.
181: Unable to connect to the alarm panel because the alarm panel interface module is in installer mode.
182
183: The requested panel partition does not exist or is not activated.
184: The alarm panel version is outdated and does not support this command.
185: The alarm panel could not be armed. Please check that all relevant zones are not active.
186: The alarm panel is not ready to arm. Please check that all relevant zones are not active.
187
188
189
190: A communication issue between the alarm panel and communicator occurred.
191: The alarm panel is unresponsive. Please check your panel settings on the communicator.
192
193
194: The alarm panel is busy with another user.
195: Too many commands have been sent to the alarm panel.
196: The alarm panel is locked out.
197: Unable to connect to the alarm panel, due to power issues.
198: The alarm panel is not in the correct programming mode. Please edit your panel settings.
199: The user code to connect to the alarm panel is incorrect. Please use the same user used to arm/disarm the alarm panel.
200: The user code to connect to the alarm panel is incorrect. Please use the same user used to arm/disarm the alarm panel.
201: The alarm panel is busy and unable to receive commands at this time.
202: The requested partition does not exist or is not activated.
203: The alarm panel version is outdated and does not support this command.
204: The alarm panel is unable to process this command.
205: The alarm panel did not respond in time.
206: The alarm panel reset failed.
207: No alarm found on the alarm panel.
208: Please enable the communicator in the alarm panel programming settings.
209: There is an invalid trouble condition on the alarm panel.
210: The alarm panel requires a programming tag.
211: Too many commands have been sent to the alarm panel.
212: Active session on the panel has expired.
213
214
215
216: The alarm panel command cannot be performed because the system is armed.
217: The alarm panel command cannot be performed because the system is in alarm. Please remove the alarm panel from its alarm condition and try again.
218: The alarm panel command cannot be performed because there is a default jumper on the alarm panel. Please remove the default jumper and try again.
219
220: Please exit the alarm panel programming mode and try again
221
222
223: The user code is already in use on the alarm panel.
224: The alarm panel command cannot be performed because the system is in RF allocation mode.
225
226: The alarm panel is being remotely upgraded.
227
228
301: The app team has been notified to resolve the issues.
302: The app team has been notified to resolve the issues.
303: The app team has been notified to resolve the issues.
304: The app team has been notified to resolve the issues.
305
306
307
308: Panel request was cancelled.
401: The user code to connect to the alarm panel is invalid. Please change your user code on the alarm panel.
102: An invalid response has been received from the communicator.
103: A link could not be established with the panel. Check that your communicator panel settings match the alarm panel.
104: A link could not be established with the panel.
105
106: The wireless device selected does not match the command. Please check your wireless type settings.
107: The wireless device does not support this command. Please check your wireless type settings.
108
120: There is already an active connection to the panel. This could be another user or a communicator upgrade.
121
122
123: Unable to connect to the user servers.
124
125
126: This user does not have permission to access the panel.
127: The connection to the user server has been lost.
128: Unable to connect to the communicator. This could be due to the cellular network not being available or congested.
129: The cellular network provider dropped communication to the panel.
140
141
142: The server connection has been dropped due to inactivity.
143: The device connection has been dropped due to inactivity.
144: The connection to the panel was lost.
145: The panel did not respond in time.
146: The command is not supported. Please check your panel setting on the communicator.
147
148
149
160: The user code to connect to the alarm panel. Please use the same user code used to arm/disarm the alarm panel.
161
162
163: The user code to connect to the alarm panel. Please use the same user code used to arm/disarm the alarm panel or change your panel settings.
164
165: An unknown panel error was received from the alarm panel.
166: The alarm panel version is outdated and does not support this command.
167
168
169: The alarm panel denied this command. The user might not have permission from the alarm panel to perform this action.
170
171: Too many commands have been sent to the alarm panel.
172: Too many commands have been sent to the alarm panel.
173: Too many commands have been sent to the alarm panel.
174: Too many commands have been sent to the alarm panel.
175: The alarm panel interface module did not respond.
176: The alarm panel interface module did not respond.
177: The alarm panel interface module did not respond.
178: The alarm panel interface module is not communicating with the alarm panel.
179: The alarm panel interface module is busy at present.
180: The alarm panel interface module is busy at present.
181: Unable to connect to the alarm panel because the alarm panel interface module is in installer mode.
182
183: The requested panel partition does not exist or is not activated.
184: The alarm panel version is outdated and does not support this command.
185: The alarm panel could not be armed. Please check that all relevant zones are not active.
186: The alarm panel is not ready to arm. Please check that all relevant zones are not active.
187
188
189
190: A communication issue between the alarm panel and communicator occurred.
191: The alarm panel is unresponsive. Please check your panel settings on the communicator.
192
193
194: The alarm panel is busy with another user.
195: Too many commands have been sent to the alarm panel.
196: The alarm panel is locked out.
197: Unable to connect to the alarm panel, due to power issues.
198: The alarm panel is not in the correct programming mode. Please edit your panel settings.
199: The user code to connect to the alarm panel is incorrect. Please use the same user used to arm/disarm the alarm panel.
200: The user code to connect to the alarm panel is incorrect. Please use the same user used to arm/disarm the alarm panel.
201: The alarm panel is busy and unable to receive commands at this time.
202: The requested partition does not exist or is not activated.
203: The alarm panel version is outdated and does not support this command.
204: The alarm panel is unable to process this command.
205: The alarm panel did not respond in time.
206: The alarm panel reset failed.
207: No alarm found on the alarm panel.
208: Please enable the communicator in the alarm panel programming settings.
209: There is an invalid trouble condition on the alarm panel.
210: The alarm panel requires a programming tag.
211: Too many commands have been sent to the alarm panel.
212: Active session on the panel has expired.
213
214
215
216: The alarm panel command cannot be performed because the system is armed.
217: The alarm panel command cannot be performed because the system is in alarm. Please remove the alarm panel from its alarm condition and try again.
218: The alarm panel command cannot be performed because there is a default jumper on the alarm panel. Please remove the default jumper and try again.
219
220: Please exit the alarm panel programming mode and try again
221
222
223: The user code is already in use on the alarm panel.
224: The alarm panel command cannot be performed because the system is in RF allocation mode.
225
226: The alarm panel is being remotely upgraded.
227
228
301: The app team has been notified to resolve the issues.
302: The app team has been notified to resolve the issues.
303: The app team has been notified to resolve the issues.
304: The app team has been notified to resolve the issues.
305
306
307
308: Panel request was cancelled.
401: The user code to connect to the alarm panel is invalid. Please change your user code on the alarm panel.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article