Xwave2 devices are fully compatible with 806 panels.
New hardware and existing hardware are firmware-dependent and upgradeable only via plugin HYYP device.
New HW 682 requires FW v1.33G upwards.
Old HW 684 requires FW v1.88 upwards.
One range of wireless devices (Motion sense and Xwave2) is Optex compatible. REM5-1 remotes.
806 uses Xwave2 Lite with different features compared to X64s Xwave2 devices. Check your manual.
They operate on the same frequency.
The RXC-S is phased out by the end of the year.
The RX range is 20 years old. FLIPX is the replacement. or
Motion sense includes the mounting bracket. Motion sense is a local product with a 15-meter detection range and is small pet-friendly
New hardware and existing hardware are firmware-dependent and upgradeable only via plugin HYYP device.
New HW 682 requires FW v1.33G upwards.
Old HW 684 requires FW v1.88 upwards.
One range of wireless devices (Motion sense and Xwave2) is Optex compatible. REM5-1 remotes.
806 uses Xwave2 Lite with different features compared to X64s Xwave2 devices. Check your manual.
They operate on the same frequency.
The RXC-S is phased out by the end of the year.
The RX range is 20 years old. FLIPX is the replacement. or
Motion sense includes the mounting bracket. Motion sense is a local product with a 15-meter detection range and is small pet-friendly
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article